Standing Desk Wire Management for Under $20

by Robb Sutton

Some links below are affiliate links. If you buy through one, this site earns a commission at no extra cost to you. It never changes a verdict — here is how that works.

Server wire management trays: https://amzn.to/4lhe5XR

If you’re spending more than $20 on wire management for your desk, you’re spending too much. Here’s my solution: it costs less than that and keeps every wire in my office completely out of sight.

When I switched my home office to the FlexiSpot four-leg standing desk, there was one thing I wanted to get right this time: the wiring underneath.

Why standing desks make cables harder

Two things make this harder with a standing desk. First, the desk itself has components with their own wiring, on top of your computer, monitors and whatever else is up top. Second, the desk moves up and down, and the last thing you want is a bunch of wires tugging on each other while it does.

So with standing desks I like to get as much of the wiring as possible onto the desk itself, with a single power cable going to the floor if I can. These desks rise a good amount when you stand, and you don’t want a hornet’s nest of wires dangling all over the place.

Every desk brand offers wire management, trays and other solutions. But they’re expensive, and when the desk is all the way up, I don’t want to see low-hanging trays.

The fix: server rack cable trays

Search Amazon and you’ll find these trays. They’re actually made for server racks, and for about $14 to $16 you get four 15½-inch wire management kits. Each one is a channel with a cover that slides or snaps on. You run the wires through the channel and use the grooves on the sides as pass-throughs.

  1. Put about three trays under the desk, with a couple of inches between them so wires can come in and out where you need them.
  2. Stick them up with the adhesive strips that come in the kit. Nothing permanent, and no drilling into the desk.
  3. Use the same strips to mount a simple power strip under the desk, and run it to a surge protector or UPS on the floor, out of sight.

What you end up with

An incredibly clean setup that’s easy to install, isn’t permanent, doesn’t hurt the desk, and hides completely behind the desk frame. For around $15, it’s some of the easiest wire management you can do.

More from the channel

From the shopFriction Is The Enemy$18.45Shop →

Related Posts